R5 Aluminum Bright
R5 Aluminum Bright Dip is a heated chemical process used for to increase specularity or brightness of aluminum and aluminum alloys by leveling peaks and valleys in the surface micro roughness of the parts.
Hard Coat & Anodize
Hard Coat and Hard Anodize are terms used in describing a hard anodic coating with tuff, hard and abrasion resistant characteristics. These hard anodic coatings are typically applied with a thickness above 0.002“within a 10% variation.
Zinc Plating
Zinc Plating is a coating applied to steels, stainless steels and copper bearing alloys. It is applied as a electrodeposited coating to form a protective layer, that when broken or damage will act a sacrificial anode.
Passivation is a chemical treatment process used in the removal of iron and iron compounds from the surface of stainless steel alloys.
Masking for Selective Metal Finishing
This is a process in which specific surfaces or features of a parts such as, holes, threads, surfaces, grooves, etc...
Chemical Conversion Coatings
Chemical Conversion coatings, also known as Chem Film, Iridite, Alodine...etc, are Conversion coatings, typically produced by Chromates and are thin protective coatings or layers of chromium oxide and other chemical compounds.
Dry Film Lubricants
Dry film Lubricants, also known as Dry Lube are coatings made of fine particles of lubricating pigments blended with binders and other additives.
Media Blasting
Media blasting is a general term used to describe processes also knows as, Sand Blasting, Grit Blasting, Bead Blasting and/or Glass Bead Blast.
Sulfuric Acid Anodize
Sulfuric Acid Anodize is a protective anodic oxide coating produced on Aluminum and aluminum alloys applied by an electrochemical process that converts the substrate metal surface into a, durable, corrosion- resistant and decorative finish.

Precision Anodizing and Plating, Inc. was founded in 1971 and is a leader in the Metal Finishing Industry in the Southern California Region, in Anaheim, California and is located in the vicinity near the junction of the 91 and 57 freeways. We service the Military, Aerospace, Marine, Medical, Automotive and Commercial industries. Our facility is a 48,000 square foot concrete building with three crane systems supporting our processing lines.

Our process control is supported by the Visual Shop Management Software system, well trained experience staff, in-house laboratory and ISO-9001-2008 Registered Quality System.
Our goal and emphasis is steered at providing the highest level in Quality and Service in the most cost effective manner, guided by continuous improvement culture. Our Transportation Fleet provides pickups and delivery services in the Los Angeles, Orange, and San Diego, Inland Empire and Riverside counties.

Contact Us




    [email protected]

    Open Everyday 7:00 am - 11:45pm

Get a FREE Quote